 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters TES 2N Series, 2 Watt RoHS Features Low Profile SMD-Package Wide 2:1 Input Voltage Range I/O-Isolation 1500 VDC Input Filter meets EN55022, Class A Operating Temperature Range -40C to +71C compliant pending Short-Circuit Protection Lead free Design, RoHS compliant 3 Year Product Warranty The TES-2N series is a family of high performance 2W DC/DC converter modules featuring wide 2:1 input voltage ranges. The 28 models come in a low profile SMD package which requires just 3 cm2 space on the PCB. A high efficiency allows an operating temperature range of -40C to 71C without derating. A built-in EMI input filter complies with EN 55022, class A. Typical applications for these converters are battery operated equipment, instrumentation, communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required. Models Ordercode TES 2N-0510 TES 2N-0511 TES 2N-0512 TES 2N-0513 TES 2N-0521 TES 2N-0522 TES 2N-0523 TES 2N-1210 TES 2N-1211 TES 2N-1212 TES 2N-1213 TES 2N-1221 TES 2N-1222 TES 2N-1223 TES 2N-2410 TES 2N-2411 TES 2N-2412 TES 2N-2413 TES 2N-2421 TES 2N-2422 TES 2N-2423 TES 2N-4810 TES 2N-4811 TES 2N-4812 TES 2N-4813 TES 2N-4821 TES 2N-4822 TES 2N-4823 http://www.tracopower.com Input voltage range Output voltage 3.3 VDC 5 VDC 12VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC Output current max. 500 mA 400 mA 165 mA 135 mA 200 mA 85 mA 65 mA 500 mA 400 mA 165 mA 135 mA 200 mA 85 mA 65 mA 500 mA 400 mA 165 mA 135 mA 200 mA 85 mA 65 mA 500 mA 400 mA 165 mA 135 mA 200 mA 85 mA 65 mA Efficiency typ. 70 % 73 % 75 % 73 % 64 % 69 % 71 % 73 % 77 % 80 % 80 % 73 % 78 % 78 % 72 % 77 % 80 % 81 % 74 % 78 % 80 % 71 % 73 % 79 % 79 % 71 % 77 % 77 % Page 1 of 3 4.5 - 9.0 VDC 9 - 18 VDC 18 - 36 VDC 36 - 72 VDC DC/DC Converters TES 2N Series Input Specifications Input current at full load (nominal input) 5 12 24 48 5 12 24 48 Vin Vin Vin Vin Vin Vin Vin Vin models: models: models: models: models: models: models: models: 600 mA typ. 220 mA typ. 110 mA typ. 55 mA typ. 11 V max. 25 V max. 50 V max. 100 V max. EN 55022 level A, FCC part 15, level A 2% - Input variation Vin min. to Vin max. 0.5 % max. - Load variation 25 - 100 % 0.75 % max. dual output models: 2.0% (balanced load) 50 mVpk-pk max 0.02 %/K indefinite, automatic recovery 25% of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) 3.3 5 12 15 5 12 15 - Operating - Storage VDC VDC VDC VDC VDC VDC VDC output output output output output output output models: 2'200 F max. models: 1'000 F max. models: 170 F max. models: 110 F max. models: 470 F max. models: 100 F max. models: 47 F max. - 40 C ... + 71 C (no derating) - 55 C ... + 125 C 95 % rel. H max. > 1.0 Mio h @ 25C 1'500 VDC 250 pF > 1`000 M Ohm 300 kHz (PFM) non conductive FR4 3.8 g (0.13oz) Peak temp. 245C (10 sec max.) 217C for 90 sec. max. Convection reflow solder process is recommended Input/Output Input/Output Input/Output (500 VDC) 2 Watt Surge voltage (100 msec. max.) Conducted noise (input) Output Specifications Voltage set accuracy Regulation Ripple and noise (20 MHz Bandwidth) Temperature coefficient Short circuit protection Minimum load Capacitive load General Specifications Temperature ranges Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217 F) Isolation voltage Isolation capacity Isolation resistance Switching frequency General Specifications Case material Weight Reflow soldering profile All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TES 2N Series Outline Dimensions mm (inches) 2 Watt 7.6 (0.30) 0.3 (0.1) 0.6 (0.2) 23.8 (0.94) 0.6 (0.2) 13.7 (0.54) 18.1 (0.71) Pin-Out 0.15 Pin 1 7 Single -Vin (GND) No con. No con. +Vout -Vout +Vin Dual -Vin (GND) No con. Common +Vout -Vout +Vin 16 10 9 8 9 10 16 1 7 8 Pin diameter o 0.5 0.05 (0.02) 0.002 Tolerances: 0.25 (0.01) 3.0 1.0 (0.04) 15.24 (0.6) 2.54 (0.1) (0.12) Outline Dimensions mm (inches) 1.6 (0.06) 15.24 (0.6) 2.54 (0.1) Specifications can be changed without notice Rev. 07/05.1 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43311 4511 * Fax +41 43311 4545 * info@traco.ch * www.tracopower.com 2.4 (0.09) 19.3 (0.76) Page 3 of 3 |
Price & Availability of TES2N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |